Segment moulds
Formworks for bridge piers and headers
TUNNEL LINING SOLUTIONS
Euroform realises moulds both for fixed installations and carousel systems, for
all types of tunnel segments and for each tunnel ring configuration.
All the formworks are designed for a simple, safe and durable use. The
regulation system that characterises the Euroform segment moulds enables full
compliance with the closest tolerances.
Carousel plants
When it is necessary to make the production of the tunnel segments regular,
Euroform provides carousel automated systems.
The carousel system permits to obtain precise and constant execution times
for each task thanks to high-efficiency cycles.
The carousel system also allows for a reduction in required personnel, a more
efficient use of space and it increases the levels of safety.
TAILOR-MADE Formworks for conventional tunnelling
Each tunnel has its diameter, section profile and geological composition; in order to get the maximum precision
in the lining of each of them, Euroform gives the solution that best suits project requests thanks to an
extensive portfolio of formworks.
Bypass, niche and collar formworks
Slab formwork
Service gantries
The formworks for bridge piers and headers are designed to speed up the operations of molding and demolding
by a modular system of interconnected shutters.
Segment handling devices
According to the customer's needs, Euroform supplies every type of equipment for the handling of the tunnel
segments in production plants.
Special equipment
Each project has its own peculiarities that require special solutions. Also in this case, Euroform responds
to customer requests by providing all the necessary.
Segment demolding and tilting clamps
Segment tilting tables
Multi-segment transfer trolleys
Vacuum segment handling devices
Concreting buckets
Concrete distributor with vibrating screed
Steam production plant
Self-reacting formwork
The self-reacting tunnel formwork makes the casting of the vault quick and
precise even for tunnels of considerable length.
It is indeed not necessary to provide anchors to the ground or on the quayside
and, therefore, it simplifies mold and demold operations.
Self-supporting formwork
The self-supporting tunnel formwork reduces the transversal displacement
during the pouring via the anchors at the foot. The anchor can be made by
tyloops on the quay or by a stopping system on the ground.
Euroform Polyradial system for variable cross section tunnels
Invert formwork
The same modular tunnel formwork can be used for the lining of different
tunnels with different cross sections.
Thanks to section profile radii ranging from 4.3 m to 8.9 m, the «E.P.» system
offers a great versatility which results also into a high reduction in loading,
transport and storage costs.
The formwork for tunnel bypass is characterized by a self-propelled transport
system that guarantees high manoeuvrability and a rapid transfer from one cast
to the next.
Niche and collar tunnel formworks are easy to install and can be supplied with
fast handling systems.
The slab tunnel formwork may have single or multiple interconnected tables
configuration, so that it is possible to realise pourings of considerable length
without waiting for the curing of the last concreted slab sector.
The invert tunnel formwork is usually self-supporting type and, if required,
it could be self-launching.
The membrane gantry can be equipped with a hydraulic lifting system for an
easy and safe installation of waterproof membranes.
The curing gantry gives direct control of temperature and humidity values with
continuous data recording.
The reinforcement gantry makes safe and easy the positioning of the reinforcing
bars with reduced staffing.
segment moulds, Conventional formworks and service equipment for
precise tunnel lining
Euroform designs and manufactures high quality formworks and service machinery for the lining of tunnels
made either with TBMs or drill and blast method. Accuracy in planning and design, in manufacturing and
adjusting the equipment, as well as in the audit of the final product, permits us to achieve the highest
standards of quality and precision.
Fullround formwork
The fullround tunnel formwork has a complete circular cross-section for casting
over the entire transverse profile of the tunnel in a single shot. It is made up of
interconnected longitudinal sectors with telescopic configuration, it allows the
rear sector to be dismantled, transported in front of the head one and re-set up,
thus permitting a continuous concrete pouring.
Segment moulds
Formworks for bridge piers and headers
TUNNEL LINING SOLUTIONS
Euroform realises moulds both for fixed installations and
carousel systems, for all types of tunnel segments and
for each tunnel ring configuration.
All the formworks are designed for a simple, safe and
durable use. The regulation system that characterises
the Euroform segment moulds enables full compliance
with the closest tolerances.
Carousel plants
When it is necessary to make the production of the
tunnel segments regular, Euroform provides carousel
automated systems. The carousel system permits to
obtain precise and constant execution times for each
task thanks to high-efficiency cycles. The carousel
system also allows for a reduction in required personnel,
a more efficient use of space and it increases the levels
of safety.
TAILOR-MADE Formworks for conventional tunnelling
Each tunnel has its diameter, section profile and geological composition; in
order to get the maximum precision in the lining of each of them, Euroform
gives the solution that best suits project requests thanks to an extensive
portfolio of formworks.
Bypass, niche and collar formworks
Slab formwork
The formworks for bridge piers and headers are designed to speed up the
operations of molding and demolding by a modular system of interconnected
shutters.
Segment handling devices
According to the customer's needs, Euroform supplies every type of
equipment for the handling of the tunnel segments in production plants.
Special equipment
Each project has its own peculiarities that require special solutions. Also in this
case, Euroform responds to customer requests by providing all the necessary.
Segment demolding and tilting
clamps
Segment tilting tables
Multi-segment transfer trolleys
Vacuum segment handling
devices
Concreting buckets
Concrete distributor with
vibrating screed
Steam production plant
Self-reacting formwork
The self-reacting tunnel formwork makes the casting of
the vault quick and precise even for tunnels of
considerable length.
It is indeed not necessary to provide anchors to the
ground or on the quayside and, therefore, it simplifies
mold and demold operations.
Self-supporting formwork
The self-supporting tunnel formwork reduces the
transversal displacement during the pouring via the
anchors at the foot.
The anchor can be made by tyloops on the quay or by a
stopping system on the ground.
Fullround formwork
The fullround tunnel formwork has a complete circular
cross-section for casting over the entire transverse
profile of the tunnel in a single shot. It is made up of
interconnected longitudinal sectors with telescopic
configuration, it allows the rear sector to be dismantled,
transported in front of the head one and re-set up, thus
permitting a continuous concrete pouring.
Euroform Polyradial system
for variable cross section tunnels
Invert formwork
The same modular tunnel formwork can be used for the
lining of different tunnels with different sections.
Thanks to section profile radii ranging from 4.3 m to
8.9 m, the «E.P.» system offers a great versatility which
results also into a high reduction in loading, transport
and storage costs.
The formwork for tunnel bypass is characterized by a
self-propelled transport system that guarantees high
manoeuvrability and a rapid transfer from one cast to the
next.
Niche and collar tunnel formworks are easy to install and
can be supplied with fast handling systems.
The slab tunnel formwork may have single or multiple
interconnected tables configuration, so that it is possible
to realise pourings of considerable length without waiting
for the curing of the last concreted slab sector.
The invert tunnel formwork is usually self-supporting type
and, if required, it could be self-launching.
Service gantries
The membrane gantry can be equipped with a hydraulic
lifting system for an easy and safe installation of
waterproof membranes.
The curing gantry gives direct control of temperature and
humidity values with continuous data recording.
The reinforcement gantry makes safe and easy the
positioning of the reinforcing bars with reduced staffing.
Euroform designs and manufactures high quality formworks and service
machinery for the lining of tunnels made either with TBMs or drill and blast
method. Accuracy in planning and design, in manufacturing and adjusting the
equipment, as well as in the audit of the final product, permits us to achieve
the highest standards of quality and precision.
segment moulds, Conventional formworks and service
equipment for precise tunnel lining
Formworks for bridge piers and headers
TUNNEL LINING SOLUTIONS
Euroform realises moulds both for fixed installations and
carousel systems, for all types of tunnel segments and for
each tunnel ring configuration.
All the formworks are designed for a simple, safe and
durable use. The regulation system that characterises the
Euroform segment moulds enables full compliance with
the closest tolerances.
Carousel plants
When it is necessary to make the production of the tunnel
segments regular, Euroform provides carousel automated
systems.
The carousel system permits to obtain precise and
constant execution times for each task thanks to
high-efficiency cycles.
The carousel system also allows for a reduction in required
personnel, a more efficient use of space and it increases
the levels of safety.
TAILOR-MADE
Formworks
for
conventional
tunnelling
Each tunnel has its diameter, section profile and geological
composition; in order to get the maximum precision in the
lining of each of them, Euroform gives the solution that
best suits project requests thanks to an extensive portfolio
of formworks.
Bypass, niche and collar formworks
Slab formwork
Service gantries
The formworks for bridge piers and headers are designed
to speed up the operations of molding and demolding by a
modular system of interconnected shutters.
Segment handling devices
According to the customer's needs, Euroform supplies
every type of equipment for the handling of the tunnel
segments in production plants.
Special equipment
Each project has its own peculiarities that require special
solutions. Also in this case, Euroform responds to
customer requests by providing all the necessary.
Segment demolding and
tilting clamps
Segment tilting
tables
Multi-segment transfer
trolleys
Vacuum segment
handling devices
Concreting buckets
Concrete distributor with
vibrating screed
Steam production
plant
Self-reacting formwork
The self-reacting tunnel formwork makes the casting of
the vault quick and precise even for tunnels of
considerable length. It is indeed not necessary to provide
anchors to the ground or on the quayside and, therefore, it
simplifies mold and demold operations.
Self-supporting formwork
The self-supporting tunnel formwork reduces the
transversal displacement during the pouring via the
anchors at the foot.
The anchor can be made by tyloops on the quay or by a
stopping system on the ground.
Fullround formwork
The fullround tunnel formwork has a complete circular
cross-section for casting over the entire transverse profile
of the tunnel in a single shot. It is made up of
interconnected longitudinal sectors with telescopic
configuration, it allows the rear sector to be dismantled,
transported in front of the head one and re-set up, thus
permitting a continuous concrete pouring.
Euroform
Polyradial
system
for
variable
cross
section
tunnels
Invert formwork
The same modular tunnel formwork can be used for the
lining of different tunnels with different cross sections.
Thanks to section profile radii ranging from 4.3 m to 8.9 m,
the «E.P.» system offers a great versatility which results
also into a high reduction in loading, transport and storage
costs.
The formwork for tunnel bypass is characterized by a
self-propelled transport system that guarantees high
manoeuvrability and a rapid transfer from one cast to the
next.
Niche and collar tunnel formworks are easy to install and
can be supplied with fast handling systems.
The slab tunnel formwork may have single or multiple
interconnected tables configuration, so that it is possible
to realise pourings of considerable length without waiting
for the curing of the last concreted slab sector.
The invert tunnel formwork is usually self-supporting type
and, if required, it could be self-launching.
The membrane gantry can be equipped with a hydraulic
lifting system for an easy and safe installation of
waterproof membranes.
The curing gantry gives direct control of temperature and
humidity values with continuous data recording.
The reinforcement gantry makes safe and easy the
positioning of the reinforcing bars with reduced staffing.
E
uroform designs and manufactures high quality
formworks and service machinery for
the lining of
tunnels made either with TBMs or drill and blast method.
Accuracy in planning and design, in manufacturing and
adjusting the equipment, as well as in the audit of the final
product, permits us to achieve the highest standards of
quality and precision.
segment moulds, Conventional formworks
and service equipment for precise tunnel
lining
SEGMENT MOULDS
